Fantastic Tips About How To Build A Wood Retaining Wall
You will have to plan the wood retaining wall and then prepare the area to be installed, digging into the slope.
How to build a wood retaining wall. They should be 18 inches deep. Place the first row of timbers directly on the crushed rock base. Screw a 2x8 top cap to the top.
3 dig 18 inch (46 cm) deep holes for your posts. Dig a trench 12 inches deep around perimeter of retaining wall. Use a steel bar to loosen rocks.
Start at a corner or structure that you are abutting against. Thrust your shovel into the soil and jiggle it forward and backward and side to side. Step 1 remove soil and dig a trench lay out the wall, excavate the soil behind it, and dig a trench 8 inches deep for the first course of timbers.
Make sure to seam plywood over studs. Nail the header onto the bottom of the. (see below for a shopping list an.
Use a hand tamper to compact the bottom of the trench. Leave no gap between the timbers. Once the posts are cut, then lay them aside, and dig the holes you need on each side of the retaining wall area.
Nail vertically oriented plywood to the top and bottom plates and to the front of the wall. I've been having issues with dirt flowing down this hill and into my yard, so today i'm going to clean that up with a simple timber retaining wall.this wall. Once the soil is loosened, start digging down into the ground.